100V SYSTEMS

HIGH IMPEDANCE

The ideal distributed sound system for commercial applications, the 100v line, is perfect for long-distance distribution of large numbers of loudspeakers with a relatively low power output but is not suitable for high power or hifi music reproduction.

Take into consideration that the Amplifier power should be equal to or greater than the total speaker load

More speakers on the same amplifier and add more in the future

The greater distance which can go up to 200 meters

Mono playback to ensure that the sound is being played through every single speaker

Easy to install and simple to calculate

Ohm SYSTEMS

LOW IMPEDANCE

Typically used in residential or small commercial setups, such as home theatres, small conference rooms, or offices.

The lower number of speakers but greater sound

Perfect for hifi audio output

Stereo where you can get the feeling of left and right

FAQ

Which speaker should I use in a bathroom?

We offer speakers from our HAPPI series, which features a round cone with an aluminum coating and grill. These speakers have water-repellent properties, making them resistant to water. If you are planning to install speakers in a shower, we recommend opting for speakers from our dedicated WATERPROOF series.

Which speaker shall I buy?

At Dedott, we offer a very wide range of speakers, from entry-level, moisture-resistant models with more detail to high-end speakers. It depends on the budget and the use of this speaker.

What is multiroom system?

This is an audio system that can control multiple rooms or zones. There are also systems where you can listen to a different source in each zone. This is called a multiroom-multisource system.

What is mixing Amplifier?

Is a device that does both, mixing and amplification. Commonly used where multiple audio sources need to be mixed and amplified such as venues, conferences, live performances, and PA systems.

What is Matrix?

It is a device that coordinates everything. Which sound goes where and the volume for every zone.

How to wire 100v systems?

Speakers can be connected in parallel (cascaded) for each zone. Cable to be used are shielded flexible cables 2×1,5mm² or 2×2,5mm².

Dedott, Your dedicated technology partner for sound systems

Rely on us to design your audio system within your budget