Control · JUNG · ONE Light · ComfortClick

KNX DALI Lighting Control

Dim every light individually, recall scenes and tune colour temperature from the same KNX keypads and app that run the rest of the building. Dedott supplies the complete KNX-DALI lighting chain from one distributor — JUNG DALI-2 gateways, ONE Light DALI drivers and fittings, and ComfortClick visualisation — from its Dubai office to integrators, contractors and consultants across the UAE and the GCC.

ONE Light magnetic track lighting with DALI-dimmable spots

The Basics

What Is DALI, and How Does It Work With KNX?

DALI: lighting only

DALI is a lighting control protocol. Every LED driver gets its own address, so each light can be dimmed on its own and reports back faults such as a failed lamp.

KNX: the whole building

KNX runs lighting, air conditioning, blinds and more from one system — but it does not talk to DALI drivers directly. KNX acts as the backbone that links several DALI lines together.

The gateway in between

A KNX DALI gateway in the distribution board translates between the two. One DALI line handles up to 64 devices, so larger floors use more gateways or a 2-gang model.

How It Connects

One Lighting Chain, One Distributor

Every link in the chain comes from a brand Dedott distributes, so the products are matched before they reach site.

JUNGKNX keypadPush-buttons, room controllers
→
KNXKNX busThe building backbone
→
JUNGKNX DALI-2 gatewayIn the distribution board
→
ONE LightDALI driverOne address per driver
→
ONE LightLED fittingSpots, tracks, downlights
ComfortClick connects to KNX for the app and visualisation — lighting scenes on phones, tablets and wall panels.

JUNG

KNX DALI-2 Gateways

DALI-2 certified, KNX Data Secure, and ready for tunable white and colour (DALI Device Type 8). DALI-2 sensors such as push-buttons and presence detectors can be used as inputs.

KNX DALI-2 Gateway Colour, 1-gang

30064 1S DA2 R · One DALI system, DIN-rail mounted

DALI devices
up to 64
Groups
up to 32
Scenes
16
Colour
DT8: colour temp., RGB, RGBW
Width
4 rail units (72 mm)
Ask about this product

KNX DALI-2 Gateway Colour, 2-gang

30128 1S DA2 R · Two DALI systems, for larger floors and villas

DALI devices
up to 2 × 64
Groups
up to 2 × 32
Scenes
16 per DALI system
Colour
DT8: colour temp., RGB, RGBW
Width
4 rail units (72 mm)
Ask about this product

More JUNG KNX products →

ONE Light

DALI Drivers & DALI Light Fittings

The end of the chain: DALI-dimmable LED drivers and DALI track and magnetic-track fittings, including DT8 tunable-white models.

89009L

DALI & Push-to-Dim constant-current driver

Dimming
DALI, Push-to-Dim
Output
350–700 mA (DIP switch)
Use
Single spots
Ask about this product

89040L

DALI & Push-to-Dim driver

Dimming
DALI, Push-to-Dim
Type
LED driver
Use
Spots & downlights
Ask about this product

89050TLD

50 W multi-dimming driver

Dimming
Triac, DALI, Push-to-Dim, 1–10V
Output
200–1500 mA
Use
Flexible stock item
Ask about this product

42106BL

22 W adjustable DALI track light

Track
48V magnetic MINI / MIDI / MAXI
Control
DALI
Use
Retail, galleries, living areas
Ask about this product

65670CTL

40 W DALI tunable-white track spot

Control
DALI DT8, CCT tunable
Track
DALI 3-phase track
Use
Retail, hospitality
Ask about this product

40001AL / 40002AL / 40003AL

Square 3-phase + DALI track, 1 / 2 / 3 m

Rating
16 A
Lines
3-phase + DALI
Use
Track lighting runs
Ask about this product

Browse the ONE Light catalogue →

ComfortClick

App & Visualisation on Top

ComfortClick bOS connects to the KNX system and turns it into one app: lighting scenes, dimming and colour temperature alongside air conditioning, blinds and other building systems — on phones, tablets and wall-mounted screens.

See ComfortClick bOS
Hotel bedroom with dimmable LED lighting

Where It’s Used

Built for Projects

Residential towersVillasHotelsOfficesRetail & showroomsGalleries

One supplier

Gateways, drivers and fittings from one distributor — one quotation, one point of contact.

Matched products

Gateway, driver and fitting choices are checked together against your lighting layout and BOQ.

Presales support

Help planning DALI lines, groups and gateway quantities for your drawings, plus regional stock and after-sales support.

FAQ

Common Questions

What is KNX DALI lighting control?

It combines two standards. DALI controls each light individually, with dimming, scenes and lamp-failure feedback. KNX controls the whole building and links several DALI lines together. A KNX DALI gateway in the distribution board translates between the two, so the same KNX keypads and app control every light.

How many lights can one DALI gateway control?

One DALI system handles up to 64 DALI devices in up to 32 groups. The JUNG KNX DALI-2 Gateway Colour 1-gang (30064 1S DA2 R) controls one DALI system, and the 2-gang version (30128 1S DA2 R) controls two, for up to 2 × 64 devices.

Can KNX DALI control tunable white and colour?

Yes. The JUNG KNX DALI-2 Gateway Colour sets colour temperature and RGB or RGBW colour on luminaires with DALI Device Type 8, such as ONE Light DT8 tunable-white fittings.

Do you supply the DALI drivers and light fittings too?

Yes. ONE Light makes DALI-dimmable drivers such as the 89009L, 89040L and 89050TLD, plus DALI track and magnetic-track fittings, so the whole lighting chain comes from one distributor.

Can the lighting be controlled from an app?

Yes. ComfortClick connects to KNX and adds the app and visualisation, so lighting scenes can be controlled from phones, tablets and wall panels together with air conditioning, blinds and other building systems.

Planning KNX DALI Lighting for a Project?

Send us your lighting layout or BOQ — we’ll reply with gateways, drivers, fittings, stock and a quotation.

Request a Quote WhatsApp Us